|
|
Building services of near zero energy buildings
Šťastný, Radek ; Tůmová, Eliška (referee) ; Hirš, Jiří (advisor)
Master´s thesis is focusing on zero energy building with technical equipment. The building was built in 70. decade of last century. It has been using for sport and cultular events until these days. Restaurant was connected to sport hall. First part is focusing on zero energy building and technical equipment, their using, combination and optimal connecting in systém. Second part solving how many fotovoltaic panels must be in the system to reching economic advantage. In third part is solving how to connecting fotovoltaic panels to the system.
|
|
|
Heating of the School Building
Holková, Soňa ; Wierzbická, Helena (referee) ; Vendlová, Lucie (advisor)
The subject of this bachelor's dissertation is heating of the Primary and the Kindergarten school's buildings. The main aim is to make a design of the heating system and the hot water preparation. The source of the heat is the hot-water pipe, which the buildings are connected trough the heating coil to.
|
|
|
Pressure losses in heating systems
Švanda, Martin ; Horká, Lucie (referee) ; Počinková, Marcela (advisor)
This diploma thesis deals with pressure losses in heating systems. The diploma thesis is divided into three sections. The first part is theoretical and deals with the occurrence of pressure losses. It discusses the properties of the fluid that affect pressure losses. It also deals with hydrodynamic phenomena, flow distribution, pressure loss distribution and its calculations. The aim of the second part, which is practical, was to create a heating project for a selected object. The object is a two-floor kindergarten building located in Velké Němčice. For this project, two heating variants were created. For the first variant, radiators and heating benches were designed and for the second variant, underfloor heating was installed in the building. The goal was to use a source which will gain heat mainly from renewable sources, so the air / water heat pump was chosen as the source of heat production. The project ends with a technical report. The third part of the thesis is dedicated to an experiment which purpose was to find out how the pressure losses of the connecting pieces are reacting to the change with the change of the heating water conditions (flow, temperature). Alongside, two pipes were created which differed in the type of connecting pieces so it allowed to compare how their pressure losses differ. Both pipes were connected by radial pressing, but the fittings differed in the quality of the brass, and therefore in the construction. Also, part of the experimental section of the diploma thesis is a description of the course of radial pressing of fittings from the Herz company.
|
|
|
Optimalize Application of Cascade Convection of a Heat Pumps
Hrnčíř, Zdeněk ; Šenk, Josef (referee) ; Gregor, Jan (advisor)
The introductory part of this diploma work contains a basic thought for the application of the heat pumps cascade connection and further I describe its function and define the notion of an optimum middle temperature.Then the direct comparison of two heats pumps cascade connection with an one-stage heat pump is shown there in a concrete example. The main part of the work is aimed to the determination of the most suitable variant for the heating and for the preparation of a hot service water in a benchmark family house. The systems of heatings are provided in options of a low-temperature floor heating and hot-water radiators. Both types of the heat pumps supply the warm to every heating system. It results into four possibles alternatives of the building heating.Besides of the alternatives mentioned above, a new variant of optimalised cascade connection was arisen during this work elaboration . The first stage of this connection which supplies the warm to the floor heating is disconnected out of the heating season and the second stage provides only a hot service water warming. The results of this work showed us that just this variant of a cascade connection causes savings in energy in comparison with an one-stage heat pump. In the conclusion of this work there are discussed the reached results and indicated the possibilities of a practical exploitation.
|
|
|
Design of Circulator Pump
Březnová, Tereza ; Sládek, Josef (referee) ; Sovják, Richard (advisor)
The Bachelor's thesis deals with the design of a circulator pump. The aim of this thesis is to design a circulator pump to solve existing circulator pump problems that have emerged from the research. Using a new, innovative design, a final solution was created to deal with ergonomic and other functional requirements. This created a new circulator pump design with a system that could be commonly used in the user's favour in the future.
|
|
|
Design of a space heating system with a heat pump air-water and solid fuel source for heating the family house
Španihelová, Kateřina ; Elcner, Jakub (referee) ; Katolický, Jaroslav (advisor)
The aim of this thesis is to design the heating system for the house, including the design and calculating the required quantity of heat for hot water. The specified heat sources are the heat pump air to water and solid fuel boiler. The task was to design the heating system to the fastest possible return on investment. The initial investment in a heat pump is high so it is necessary to design the heating system as efficiently as possible. The thesis contains a complete project of calculating heat loss of the building, the design of heating surfaces and their heat-technical calculation. There is included the design of the pipe system, the calculation of pressure loss and its regulation. The thesis also includes design of safety equipment, temperature regulation and drawings. On the basis of calculated data was processed economic assessment, which determines the return on investment to the heat pump. Compared to the gas condensing boiler the return on investment will ideally be after five years.
|
|
|
Heat Pump Supplied from Photovoltaic System
Kaděra, Jan ; Pěcha, Jiří (referee) ; Mastný, Petr (advisor)
This thesis provides heat pump usage in heating mode, heating of potable water or cooling mode. The heat pump is connected with photovoltaic power plant. The main aim of this study is to create photovoltaic system connected with heat pump and present the results of an energetic and economic evaluation. The theoretical part describes principle function heat pumps, photovoltaic power plants and components. The study provides as well a description of heating systems with a heat pump used for space heating or cooling. In the practical part of this thesis was performed calculation of energy consumption in a building. Based on this data, has been selected a suitable heat pump. To reduce the energy consumption was designed a hybrid photovoltaic power plant with a battery accumulation. Utilization of electric energy from photovoltaic system was calculated. Solutions provide the option of the energy flow analysis in specific interval. Results are summarized in the energetic and economic evaluation. The proposed solution can be applied for reconstruction or construction of a new building, focused on usage of renewable resources and emissions reduction.
|
|
|
Design of heating and ventilation system for the building with low energy costs
Halm, Petr ; Elcner, Jakub (referee) ; Hejčík, Jiří (advisor)
The thesis is aimed on a proposal from heating sources, heating systems and ventilation of family house. Designing of a house is provided by Keeo4design. This proposal contains a complex of two houses. The first one is used for residential purposes, the other is made up of mostly parking garages. The work focuses on heat loss calculation objects. Subsequently, on a proposal from heating sources, heating systems, ventilation systems and their regulation.
|
|
| |
|
|
Heating of the guesthouse
Kubík, Michael ; Vendlová, Lucie (referee) ; Počinková, Marcela (advisor)
The main subject of this bachelor thesis is the design of a heating system for a guesthouse located in a mountain area. The thesis is divided into 3 main parts - theoretical, computational and project. In the theoretical part, biomass and also petels are introduced. The second main part is focused on the concrete design of the heating system for heating and hot water. In the last part of the thesis, the technical report and the design of the building are provided.
|
guest ::
